[col span=”6″ span__sm=”12″]
[title text=”Original information”]
✔Brand Name: LEPIN
✔ Item No: 06083
✔Compatible: MOC 70657
✔Ages: 12 years and above
[col span=”6″ span__sm=”12″]
[title text=”Link youtube”]
[divider align=”center” width=”1159px” height=”2px”]
A large box, the studio is filled…
In addition, the number of parts 3979 is completely flickering, and the remaining parts are only dozens of pieces, so it is impossible to have 400+ more than the original version, even if the number of people is more than 10 pieces is impossible! (Excluding accessories, Moc’s people only count 4)
Conventional A and B inner boxes, as well as a 16×32 and 32×32 base plate.
Very thick one. There is a little color difference on the printing, which has a little influence on the assembly process.
Special attention: part of the gray, white, sand green.
There are a total of 19 steps to subcontract.
2 large stickers.
After laying a layer of brick on the bottom plate, the four corners began to tilt.
Add some bricks and the bottom plate is more obvious.
It’s a place where it’s not a hammer…
There are 24…
On the left is the limit of assembling with bare hands…
The “stick” of the fish hanging on the human body is a hose, and the clips are loose.
There is a very special place in the bunk bed here.
There is a photo at the bottom of the top.
Newly opened parts.
The brick wall of the music fight has always been different from the original one (the brick pattern is different), but the original wall is put together, and some of it will be loosened into a dog… Fortunately, it does not affect the finished structure.
One of the people changed from a handsome airplane head to an M-character… (too poor)
This house is very interesting~
The hairstyle of the man has changed again.
I really like these little ornaments!
The use of parts has been studied.
Finished multi-faceted photo
The surface of the base brick looks terrible
The inner structure is basically the same as the original one, so let’s focus on the details on the exterior.
The bricks are not flat, and the parts that are not made up by the particles are all gaps.
There are inconspicuous scratches on the smooth bricks, etc., and the rubber parts are “shrinked” (one of the bad phenomena in plastic production, that is, the surface of the rubber parts is slightly sunken).
The parts did not pay attention to the position of the nozzle when the mold was opened, and the result affected the appearance of the finished product.
I took a photo with the Ninja City and the Destiny Awards.
to sum up
The overall performance of Le Ding’s wharf was fairly satisfactory, and the replacement part only appeared on the man, and the main building part was restored.
Unfortunately, the quality of the rubber parts is getting worse and worse. If there is not an excellent original design aura, the various shortcomings of the rubber parts will definitely give up.
Large sets of replicas have always been relatively cost-effective, but there are not many brands to choose from. Le Pin has always been known for its speed of shipment, so many times in the case of “long thirst”, even if you know that there are many simultaneous productions, you will be the first choice…
Even so, Le Pin is still the leader of the current replica. I only hope that manufacturers can slowly improve the problem while at the same time shipping speed.